K/iK series 380V ZSD-KBS50AA/B
Technical index
Power range: 1.0kW ~ 7.5kW
Input voltage: three phase 380VAC (-15~+10%), 50~60HZ
Control mode: position control, speed control, torque control
Encoder type: 2500 linear incremental optical encoder (provincial line / non provincial line), 17bit absolute value encoder
Communication mode: RS485, RS232, CANopen, standard MODBUS communication, MECHATROLINKII, MECHATROLINKIII
Input and output points: IO can be programmed to support the positive and negative logic settings and functions of the relocation, the 8 input supports 16 kinds of function configuration, the 6 way output supports 12 kinds of function
Operation and display: 5 digital tube, 5 keys
Monitoring function: to provide position, speed, current, voltage, input and output, and other 16 kinds of state monitoring
Product advantage
1 eliminates the isolation transformer, saves the cost and the installation space
2 three-phase 380V voltage level driver can adapt to the maximum of 7.5kW motor, the maximum output torque of 50N.m
3. A strong internal position mode can be multi-path planning continuous operation, in order to achieve rich motion control functions; supports up to 32 groups of data planning, each set of data can be according to the demand set pulse number or the angle, and can be arranged inside a location model of speed, acceleration, deceleration and emergency deceleration
4. To support the standard Modbus protocol and CANopen communication, mechatrolink up to a maximum of 100 Mbps can on-line control mode switching, especially suitable for the axis and the axis synchronization, interpolation function, easy to deal with complex control requirements of the mechanical movement, achieve the long-range, multi axis synchronous work.
5 automatic measurement of mechanical characteristics of the load inertia, set the optimal gain, shorten the system debugging time
6. The mechanical resonance frequency analysis, configuration two trapped wave filter, adjustable frequency (50 ~ 5000Hz) and trapped wave depth, effectively overcome the vibration of low frequency resonance and mechanical end, is provided with a vibration frequency (1 ~ 100Hz) and vibration damping
7 the friction torque compensation function can reduce the influence of static friction, and improve the performance of the low speed operation.
8 debugging software support, can carry on mechanical characteristic analysis, parameter setting, monitoring and other functions, the operation is simple and intuitive.
